Post by Slick on Jul 5, 2009 15:29:48 GMT 12
2009/2010 RC STREETSTOCK RULES
#1 INTENTION OF THE CLASS
This class is a “feeder” class. Aimed at new and existing competitors. The intention of the class is to be a breeding ground for future racers and or a class for people on a low budget.
#2 DONOR CAR
#2a.
Donor car is to be Tamiya “TT01, TT01D or TT01E”.
#2b.
Silver can standard 540 only (27turn) Aftermarket alloy hop up heatsinks are allowed.
#2c.
Tamiya “TEU101BK” speed control only. Deans plugs are allowed. Aftermarket F.E.T’s or capacitors are not allowed.
#2d.
Donor cars must be made of plastic materials only. No alloy hop up parts, Carbon fibre or steel aftermarket parts. All plastic parts must be Tamiya manufactured parts only (composite plastics are allowed)
#2e.
Steel bearings are allowed.
#2f.
Tyre and wheel choice is open but no wider than 30mm. Tyre grip aiding compounds are not allowed.
#2g.
Shocks must be Tamiya manufactured plastic (oil filled allowable) Any spring allowed. No swaybars.
#2h.
Battery size open. Deans plugs allowed. Must be of 6 cell 7.2v configuration. Lipo batteries are not allowed.
#2i.
Standard differentials only (no one way, ball or locked diff’s)
#2j.
Front battery post may be removed or modiefied and replaced with hand fabricated item.
#3 FABRICATION SPECIFACATIONS
#3a.
Must resemble a Streetstock. Coupe (two doors) sedan (four doors) and station wagon body styles only. No utes, panel vans, vans or buses.
#3b.
Body’s can be fabricated from any material.
#3c.
Maximum width (including bumpers) is 230mm.
#3d.
Minimum height ground to top of roof is 120mm.
#3e.
Bumpers/Roll cages/Radiator hoops (all optional) are to be constructed of either 6mm OD round maximum or 6mm square maximum.
Furniture tube (square or round 12.7mm OD maximum) can be used as an alternative front bumper only, but must be wrapped with 6mm OD round or square maximum. There must also be a minimum gap between them of 6mm. No more than 3 spacers can be used between them.
The maximum amount of furniture tube (square or round) of any size (larger than 6mm OD) allowable in the complete construction of any Streetstock is 250mm maximum.
Bumper heights are open.
#3f.
Polycarbonate or lexan body’s can have bracing beneath the body (6mm OD round or square maximum)
#3g.
Cars are to be weighed ready to race without battery. Minumum weight 2.9kg’s. Maximum weight 3.2kg’s.
Clarification of the above rules can be made by contacting the class director
Karlos McKay mobile 027 270 9703 or e mail kate.karl@clear.net.nz
#1 INTENTION OF THE CLASS
This class is a “feeder” class. Aimed at new and existing competitors. The intention of the class is to be a breeding ground for future racers and or a class for people on a low budget.
#2 DONOR CAR
#2a.
Donor car is to be Tamiya “TT01, TT01D or TT01E”.
#2b.
Silver can standard 540 only (27turn) Aftermarket alloy hop up heatsinks are allowed.
#2c.
Tamiya “TEU101BK” speed control only. Deans plugs are allowed. Aftermarket F.E.T’s or capacitors are not allowed.
#2d.
Donor cars must be made of plastic materials only. No alloy hop up parts, Carbon fibre or steel aftermarket parts. All plastic parts must be Tamiya manufactured parts only (composite plastics are allowed)
#2e.
Steel bearings are allowed.
#2f.
Tyre and wheel choice is open but no wider than 30mm. Tyre grip aiding compounds are not allowed.
#2g.
Shocks must be Tamiya manufactured plastic (oil filled allowable) Any spring allowed. No swaybars.
#2h.
Battery size open. Deans plugs allowed. Must be of 6 cell 7.2v configuration. Lipo batteries are not allowed.
#2i.
Standard differentials only (no one way, ball or locked diff’s)
#2j.
Front battery post may be removed or modiefied and replaced with hand fabricated item.
#3 FABRICATION SPECIFACATIONS
#3a.
Must resemble a Streetstock. Coupe (two doors) sedan (four doors) and station wagon body styles only. No utes, panel vans, vans or buses.
#3b.
Body’s can be fabricated from any material.
#3c.
Maximum width (including bumpers) is 230mm.
#3d.
Minimum height ground to top of roof is 120mm.
#3e.
Bumpers/Roll cages/Radiator hoops (all optional) are to be constructed of either 6mm OD round maximum or 6mm square maximum.
Furniture tube (square or round 12.7mm OD maximum) can be used as an alternative front bumper only, but must be wrapped with 6mm OD round or square maximum. There must also be a minimum gap between them of 6mm. No more than 3 spacers can be used between them.
The maximum amount of furniture tube (square or round) of any size (larger than 6mm OD) allowable in the complete construction of any Streetstock is 250mm maximum.
Bumper heights are open.
#3f.
Polycarbonate or lexan body’s can have bracing beneath the body (6mm OD round or square maximum)
#3g.
Cars are to be weighed ready to race without battery. Minumum weight 2.9kg’s. Maximum weight 3.2kg’s.
Clarification of the above rules can be made by contacting the class director
Karlos McKay mobile 027 270 9703 or e mail kate.karl@clear.net.nz